Decorative Metal Screen Panels

Laser Cut Metal Fence Panels

Some people are more curious about how this beautiful Outdoor Privacy Panels is made, in fact, the production process of metal garden screen is not simple, about 5-6 processes. Today, the Outdoor Decorative Screens manufacturer will talk to you about the production process of weatherproof steel screen.

The first step: Select the appropriate weathering steel sheet

There are many kinds and thicknesses of weather-resistant steel plates, so the types and thicknesses of weather-resistant steel plates are determined before the design and production.

Common weathering steel models: 05CuPCrNi-A, 09CuPCrNi-A, SPA-H, B480GNQR, Q400NQR1, Q450NQR1, Q550NQR1, Q700NQR1, Q235NH, Q295NH, Q355NH, Q460NH, Q295GNHL, Q345GNHL, Q460GNHL, Corten-A, COR-TEN,B450NQ,B460NQ,Q500NQ, NMIE0921, NM360, NM400 Q450NQR1 and other weathering steel grades

The thickness of weathering steel plate is common 1,2,3,4,5,6,8,10,12,14,16,18,20 mm, and other thicknesses are also available, but they generally need to be customized, and the most commonly used is 3mm thick.

Step 2: Design of weathering steel pattern

The thickness and model of the weathering steel plate is determined after the design, under normal circumstances, the pattern of the Room Divider Screen is hollow processing, so when designing, we should pay attention to how to connect the lines of the pattern.

The third step: cutting the steel plate

After the design of the pattern is completed, it is necessary to cut, first of all, according to the size of the design of the weather-resistant steel plate into the required size, and then the design of the weather-resistant steel pattern cutting is completed, the equipment is laser cutter.

Step 4: Punch holes

If some of the later installation of the weathering steel plate needs to be wall hung, then you need to make some holes, if not needed, omit this step, because some need to be welded on site.

The fifth step: weathering steel welding

After the cutting is completed, it is necessary to weld the weathering steel according to the design drawings. The welding of weathering steel uses a special welding rod, which is required for the welding master's technology. Those who have no welding experience before should pay attention to it.

Step 6: Polish

After the welding is completed, the surface of the weathering steel will have solder joints and some flaws, which need to be polished and polished

Step 7: Weathering steel plate work rust

Whether you need to do rust depends on the specific situation, if you need to rust, then you need to use rust agent for rust treatment, if you do not worry about the effect of rust color, then let its natural rust color.